Belt and Disc Grinding Attachment 915 x 50mm Belt 178mm Disc PO362

The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.
EFFICIENCY - Superior performance and a user friendly belt change of under 5 seconds.
VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
3 YEAR WARRANTY - Against faulty materials and workmanship, even when used commercially.

SPECIFICATIONS

  • 36" x 2" (915 x 50mm) belt
  • 7" (178mm) diameter disc
  • 3 1/2" (89mm) diameter rubber contact wheel
  • 5 1/2" (140mm) diameter drive wheel
  • Suits most popular 6" or 8" bench grinders with a screw mounted wheel guard and a minimum of 1/3 HP
  • Suits grinder shaft sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2"
  • Fitting Kit supplied

 


Part Number/SKU: PO362

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.

SKU PO362
Brand ITM
Shipping Weight 10.0000kg
Shipping Width 0.450m
Shipping Height 0.450m
Shipping Length 0.450m
Unit Of Measure ea

Be The First To Review This Product!

Help other Top Tools users shop smarter by writing reviews for products you have purchased.

Write a product review


Belt and Disc Grinding Attachment 915 x 50mm Belt 178mm Disc PO362

The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.
EFFICIENCY - Superior performance and a user friendly belt change of under 5 seconds.
VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
3 YEAR WARRANTY - Against faulty materials and workmanship, even when used commercially.

SPECIFICATIONS

  • 36" x 2" (915 x 50mm) belt
  • 7" (178mm) diameter disc
  • 3 1/2" (89mm) diameter rubber contact wheel
  • 5 1/2" (140mm) diameter drive wheel
  • Suits most popular 6" or 8" bench grinders with a screw mounted wheel guard and a minimum of 1/3 HP
  • Suits grinder shaft sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2"
  • Fitting Kit supplied

 

SKU PO362
Brand ITM
Shipping Weight 10.0000kg
Shipping Width 0.450m
Shipping Height 0.450m
Shipping Length 0.450m
Unit Of Measure ea

Be The First To Review This Product!

Help other Top Tools users shop smarter by writing reviews for products you have purchased.

Write a product review